Axis M1045-LW Panduan Pengguna - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Digital Axis M1045-LW. Axis M1045-LW 20 halaman.
Juga untuk Axis M1045-LW: Panduan Pengguna (16 halaman)
Halaman Cetak
AXIS M1045-LW Network Camera
Additional settings
8. In the list of storage options, select SD card.
9. Click Save.
Advanced wireless settings
The most common security method is WPA-/WPA2-PSK. This product also supports WPA
secure method. All settings must match the settings in the access point.
TM
TM
WPA
-/WPA2
The security method WPA-/WPA2–PSK is designed for small networks and does not require an authentication server. The Axis
product uses a PSK (Pre-Shared Key) to authenticate with the access point. The key can be entered either as manual hex — a 64
hexdecimal number (0–9, A-F) — or a passphrase using 8–63 ASCII characters. The longer the passphrase, the more secure is the key.
TM
WPA
-/WPA2-Enterprise
The security method WPA-/WPA2-Enterprise is designed for large networks and requires an authentication server. The network is
protected by EAPOL (Extensible Authentication Protocol Over Lan).
Select the WPA-Enterprise type being used by the access point:
•
EAP-TLS. See page 11 .
•
EAP-PEAP/MSCHAPv2. See page 11 .
EAP-TLS
The authentication protocol EAP-TLS (Extensible Authentication Protocol - Transport Layer Security) allows the client and server to
authenticate each other using digital certificates provided by a Certification Authority. To gain access to the protected network, the
Axis product presents its certificate to the network access point. Access is granted if the certificate is approved.
Important
To ensure successful certificate validation, time synchronization should be performed on all clients and servers prior to
configuration.
Configure the wireless settings using WPA
1. Go to Settings > System > Wireless.
2. In the list, select the wireless network.
3. Under WPA-Enterprise type, select EAP-TLS.
4. Enter the user Identity associated with your certificate.
5. Select the EAPOL version (1 or 2) as used in the access point.
6. Select the CA certificate and the client certificate to use for wireless authentication.
7. Click Save.
EAP-PEAP/MSCHAPv2
The authentication protocol EAP-PEAP/MSCHAPv2 (Extensible Authentication Protocol - Protected Extensible Authentication
Protocol/Microsoft Challenge Handshake Authentication Protocol) allows the client to authenticate the network using a digital
certificate provided by a Certification Authority. The network authenticates the client using an identity and a password. To gain
access to the protected network, the Axis product presents its identity and password to the network access point. If these credentials
are approved, the access point allows access on a preconfigured port.
-PSK
TM
-/WPA2-Enterprise and EAP-TLS
TM
-/WPA2
11
TM
-Enterprise which is a more