DieHard 28.71522 Panduan Operator - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Operator untuk Inverter DieHard 28.71522. DieHard 28.71522 11 halaman. 140w power inverter
Juga untuk DieHard 28.71522: Panduan Operator (17 halaman)
Halaman Cetak
2.
fEATURES
1
3.
BEfORE USINg YOUR POWER INvERTER
NOTE: This inverter is designed to be used with a single battery, up to group 31 type
and 130 Ah or smaller in size. Do not use with any larger battery type. Do not use
with multiple batteries connected in parallel.
NOTE: Do not use the inverter with a product that draws a higher wattage than the
inverter can provide, as this may cause damage to the inverter and product.
When you turn on a device or a tool that runs on a motor, the device basically goes
through two stages:
1.
Start Up – Requiring an initial surge of power (commonly known as the
"starting or peak load").
2.
Continuous Operation – Power consumption drops (commonly known as
the "continuous load").
The wattage (WATTS) or amperes (AMPS) can normally be found stamped or
printed on most devices and equipment, or in the user's manual. Otherwise, contact
the manufacturer to find out whether the device you want to use is compatible with a
modified sine wave.
To calculate the wattage: Wattage = AMPS x 120 (AC Voltage).
To calculate the starting load: Starting Load = 2 x WATTS. In general, the start up
load of the device or power tool determines whether your inverter has the capability
to power it.
2
1.
USB Port
2.
AC Outlet
3.
12 Volt Power Plug
3
• 3 •