Diehl Metering HYDRUS Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Kontrol Jarak Jauh Diehl Metering HYDRUS. Diehl Metering HYDRUS 4 halaman.

Halaman Cetak
General
•
The remote control is used to activate the test mode with high-resolution volume display, and
optical pulse output. It can be ordered under order number 3074045.
•
The device is supplied complete with batteries already fitted. The remote control is therefore
ready for immediate use.
General procedure
•
Take the remote control and hold it so that the side marked "LED" points towards the optical
interface of the meter (Fig. A/B).
•
The maximum space between the remote control and the optical interface of the meter should
be 5 centimeters.
•
Press shortly the button
•
The yellow "ACT" LED on the device (see Fig. C) glows to indicate that the remote control is
in operation.
Industriestraße 13
91522 Ansbach
Deutschland
Tel. +49 981 18 06-0
Fax. +49 981 18 06-615
www.diehl.com/metering
(Optical test pulses ON).
Fig. B
Remote control
Fig. C
"ACT" LED
page 2 of 4