Olympus Camedia C-5050Zoom Panduan Memulai Cepat

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Kamera Digital Olympus Camedia C-5050Zoom. Olympus Camedia C-5050Zoom 2 halaman. Olympus digital camera quick start guide

Halaman Cetak

C-5050ZOOM

DIGITAL CAMERA

Quick start guide

We've included this convenient Quick start guide to show you basic functions and

techniques that will help you quickly master your new camera. For more detailed

descriptions of procedures, as well as for additional information on more sophisticated

features not covered here, please refer to the printed "Basic Manual", or the primary

"Reference Manual" on the CD-ROM.

Package contents

Camera

Software installation guide (included in

Strap

the CD-ROM package)

Lens cap/String

CD-ROM with Windows 98 USB driver

NiMH batteries (rechargeable)/

software, Reference manual, and more.

Battery charger/instruction (Olympus

Warranty card/Registration card (not

America and Olympus Europa only)

provided in some areas)

USB cable

Safety Precautions (booklet)

AV cable

xD-Picture Card

Basic manual

xD-Picture Card instructions

Remote control (Olympus America only)

Quick start guide

Remote control instruction (Olympus

America only)

OLYMPUS AMERICA INC.

Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000

24/7 online automated help: http://support.olympusamerica.com/

Phone customer support: Tel. 1-888-553-4448 (Toll-free)

Our phone customer support is available from 8 am to 10 pm (Monday to Friday) ET

E-Mail: [email protected]

Olympus software updates can be obtained at: http://olympus.com/digital/

OLYMPUS OPTICAL CO. (EUROPA) GMBH.

Premises/Goods delivery: Wendenstrasse 14-18, 20097 Hamburg, Germany

Tel. 040-237730

Letters: Postfach 10 49 08, 20034 Hamburg, Germany

http://www.olympus.com/

Printed in Japan

1AG6P1P1441--

Taking still pictures

Set the mode dial to

and turn the power

Mode dial

switch so that ON is aligned with the white

line.

Power switch

Position the AF target mark in the

viewfinder on the subject.

AF target mark

Press the shutter button gently (halfway) to adjust the

focus.

• When the focus and exposure are locked, the green lamp lights.

• If the orange lamp lights, the flash fires automatically.

Press the shutter button all the way (fully).

• The camera takes the picture.

• The card access lamp blinks while the picture is stored on the

card.

• When the green lamp stops blinking, you can take the next

picture.

To turn off the camera

Turn the power switch so that OFF is aligned with the white line.

1. Attaching the strap and lens cap

Pass the lens cap string through the hole in

the lens cap.

Fasten the strap to the strap eyelet as shown

in the diagram.

Adjust the strap to the desired length. Pull

the strap through the stopper (

) and make

sure it is fastened securely.

Attach the strap to the other eyelet in the same way.

2. Taking off the lens cap

When you want to take pictures, be sure to remove the

lens cap before turning on the camera.

VT406901

Viewing still pictures

Set the mode dial to

and turn the power

switch so that ON is aligned with the white

line.

• The monitor turns on and displays the last picture

taken. (Single-frame playback)

Quick View

Pictures can be played back by pressing

twice quickly (double-click) even

when the mode dial is set to a mode other

than

Use the arrow pad or jog dial to play back other pictures.

Orange

lamp

Arrow pad

Jumps to the picture 10 frames back.

Green

lamp

Displays the previous

Displays the next

picture.

Jumps to the picture 10 frames ahead.

Jog dial

Displays the previous

Displays the next

picture.

3. Loading the batteries

Make sure the power switch is set to OFF.

Slide the battery compartment lock from

Place your finger on the

battery compartment cover in the direction of

then lift in the direction of

Strap eyelet

• Use the ball of your finger to slide the cover. Do not use

your fingernail as this could result in injury.

Insert the batteries, making sure that they are correctly oriented as shown

in the illustration.

When using AA (R6) batteries

Battery

alignment

The correct way to insert the AA batteries

is indicated on the bottom of the camera.

Close the battery compartment cover,

then press it down

direction shown

• Press the center of the cover, as it may be difficult to

close properly by pressing the edge.

• Make sure the cover is closed securely.

Slide the battery compartment lock from

Recording movies

Set the mode dial to

and turn the power switch so that ON is aligned

Mode dial

with the white line.

• The monitor turns on and the available recording time on the card that you are using

is displayed.

Decide the composition while looking at the image on the monitor.

Press the shutter button fully to start recording.

• The orange lamp on the right of the viewfinder lights.

• During movie recording,

Press the shutter button again to stop recording.

Power switch

Viewing movies

Set the mode dial to

and turn the power switch so that ON is aligned

with the white line.

• The monitor turns on.

Use the arrow pad or jog dial to display the picture with

play back.

Press

• The top menu is displayed.

Press

to select MOVIE PLAY.

Press

to select MOVIE PLAYBACK, then

press

• The movie is played back. When playback ends, the

display automatically returns to the beginning of the

movie.

Press

again after playback ends to display

the menu.

Press

to select the desired operation, then press

PLAYBACK

: Plays back the entire movie again.

FRAME BY FRAME : Plays back the movie manually one frame at a time.

EXIT

: Leaves the movie playback mode.

4. Inserting an xD-Picture Card

Make sure the power switch is set to OFF.

Open the card cover.

mark and slide the

Insert a card.

• Hold the card straight and insert it correctly into the xD-Picture

Card/SmartMedia slot, as shown.

• An illustration showing the position for inserting the xD-Picture

Card is next to the slot.

Close the card cover securely until it clicks.

When using CR-V3 lithium battery packs

Ejecting the card

Push the card all the way in to unlock it, then let it return

slowly.

The card is ejected a short way and then stops. Hold the

card straight and pull it out.

Note

Releasing your finger quickly after pushing the

card all the way in may cause it to eject forcefully

and slide it in the

out of the slot.

• The xD-Picture Card and SmartMedia use the same slot, as do Compact Flash and

Microdrive. Two cards cannot be inserted in the one slot at the same time.

Note

•

Never open the card cover, or remove the card or the batteries while the

camera is turned on. Doing so could destroy the data stored on the card.

Once destroyed, data cannot be restored.

Protecting pictures

You are recommended to protect important pictures to avoid accidentally erasing

them.

Use the arrow pad or jog dial to display

the picture you want to protect.

"Viewing still pictures"

Press

lights red.

• The

pictures.

• To cancel protection, press

Erasing pictures (Single-frame erase)

Use the arrow pad or jog dial to display

the picture you want to erase.

"Viewing still pictures"

you want to

Press

MOVIE PLAY

• The

INFO

MODE MENU

Press

• The picture is erased and the menu is closed.

Protect button

mark appears on protected

again.

Erase button

ERASE

ERASE screen is displayed.

YES

to select YES, then press

SELECt