ALPHA WORKS GUR032 Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kabel dan konektor ALPHA WORKS GUR032. ALPHA WORKS GUR032 8 halaman. Smart cord reel

GENERAL SAFETY REGULATIONS

WARNING: The warnings, cautions, and instructions

discussed in this instruction manual cannot cover all

possible conditions or situations that could occur. It

must be understood by the operator that common

sense and caution are factors that cannot be built into

this product, but must be supplied by the operator.

1. Keep the work area clean and dry. Damp or wet work areas can result in

injury.

2. Keep children away from work area. Do not allow children to handle this

product.

3. Use the right tool for the job. Do not attempt to force small equipment to do

the work of larger industrial equipment. There are certain applications for

which this equipment was designed. It will do the job better and more safely

at the capacity for which it was intended. Do not modify this equipment, and

do not use this equipment for a purpose for which it Was not intended.

4. Check for damaged parts. Before using this product, carefully check that it

will operate properly and perform its intended function. Check for damaged

parts and any other conditions that may affect the operation of this product.

Replace damaged or worn parts immediately.

5. Do not overreach. Keep proper footing and balance at all times to prevent

tripping, falling, back injury, etc.

6. DO NOT use the equipment when tired or under the influence of drugs,

alcohol, or medication. A moment of inattention while operating this

equipment may result in serious personal injury.

7. Ensure that only the qualified electrician can installs/services this cord

reel.And it must not be used by children or unskilled persons.

8. Ensure that power supply voltage does not exceed maximum voltage rating

of reel.

9. Ensure that reel is properly be installed before connecting to power supply.

10. Ensure that all electrical power is removed form reel before servicing.

11. Check for frayed and broken wires before each use.

12. When pull electrical cord from the reel always grasp the electrical cord itself, not

the work device.

13. Remove power from the reel immediately when any malfunction occurs.

14. Never remove, tamper with or cut the safety devices fitted by the manufac-

ture.