AccuLine 40-6602 Buku Petunjuk - Halaman 13

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Tingkat Laser AccuLine 40-6602. AccuLine 40-6602 18 halaman. Self-leveling cross line laser level with 3 vertical lines

Halaman Cetak

1676H-English

Self-Calibrating the horizontal laser line and front vertical laser line

1. Locate calibration port on the side of the laser unit.

2. Remove the rubber plug.

3. Unlock the compensator.

4. Use a 2mm hex head wrench.

5. Rotate the screw counter clockwise to lower the

left side of the horizontal line and to adjust the top

of the front vertical line to the left. Do not rotate the screw more

then 4 rotations.

6. If the laser lines can not be brought into calibration after 4 rotations

the unit will need to be serviced by Johnson Level & Tool.

9. Technical Specifications

Laser Wavelength

Laser Classification

Maximum Power Output

Accuracy

Interior Range

Exterior Range

Self-leveling Range

Power Supply

Battery Life

Dimensions

Weight

Working Temperature

Center Screw Thread

IP Protection

10/3/08

10:46 AM

635nm±10nm

Class IIIa

≤5mW

±3/16"/50 ft. (±3mm/10m)

Up to 200 ft. (60m) depending upon light

conditions

Up to 300 ft. (90m) with detector

±3°

3 "AA" alkaline batteries

Approx. battery life 10 hours continuous use

3.55" x 5.83" (90 x 148mm)

2.2 lbs (1.0 Kg)

14°F to 113°F (-10°C to +45°C)

5/8" – 11

Page 13