Axitour AT-900T Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penerima Axitour AT-900T. Axitour AT-900T 6 halaman. Dual tour guide system/the receiver

3. How to use

3.1 Power On/OFF

Press and hold the "Power" button longer than 2 seconds to turn the device power on.

Afterward, press and hold the "Power" button longer than 2 seconds again to turn the device power off.

3.2 AT-900T Transmitter

The transmission is starting automatically as soon as the power is turned on the device.

The LCD is displaying

And also the Group number is set at "00" and its ID is set at "00" as a default.

3.3 AT-900R Receiver

The

is displaying during reception and the signal level bar is changing according to the strength of

reception signal.

The Volume level is set at "03" and the Group number is set at "00" as a default.

3.4 Group selection on AT-900T and AT-900R

Press and hold the "Mode" button longer than 2 seconds.

The "GRP" on the LCD is blinking.

Choose the Group number by press the "▲" or "▼" button and then release all the buttons longer than 5

seconds to leave it.

The blinking of "GRP" on LCD is stopping and the selected Group number is displaying.

3.5 ID selection on AT-900

In a group, it is available to use up to 2 units of "AT-900T" at the same time and each "AT-900T" needs to

provide each different ID per group as one is ID "00" and another is ID "01".

The ID "00" becomes a master in a group and every group needs to have a master with ID "00" without

alternative.

The "MASTER" and "TALK" are displaying on the LCD as soon as the ID "00" is set and for another

"AT-900T" who set at the ID "01", "TALK" is displaying on the LCD.

In case only one "AT-900T" is required in a group, just set the ID at "00" on the unit.

Press and hold the "Mode" button longer than 2 seconds after turn the device power on.

The "GRP" symbol on the LCD is blinking.

And then press the "Mode" button one more time instantly.

The "ID" symbol on the LCD is blinking.

Select the ID either "00" or "01" in a group by press "▲" or "▼" button and then release all the buttons

longer than 5 seconds to fix it.

, C 1,

and