Olympus DS 150 Panduan Pengoperasian - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Perekam Suara Olympus DS 150. Olympus DS 150 18 halaman. Olympus microcassette recorder user manual

Halaman Cetak

CONVENIENT FEATURES

VARIABLE CONTROL VOICE ACTUATOR (VCVA) RECORDING

In order to improve performance in long recordings, this recorder is equipped with a voice activated

recording function (called VCVA by Olympus). This function helps save memory capacity and extends

recording time with very little loss of voice data at the moment of activation.

ERASE

SP DICT

INDEX/

FOLDER

REC STOP

Press the MENU switch once (for less than 2 seconds) to display [R-TIME] and [SP] or [LP]. Then

adjust the Up/Down control to display [VCVA] and [ON] or [OFF] (see page 29). Pressing the

MENU switch within 4 seconds allows you to switch between [ON] and [OFF]. The VCVA function

is activated when the STOP button is pressed or if no operation has been performed for 4 seconds

after [ON] is displayed.

When the built-in microphone detects a voice sound, recording will start automatically. When voice

input stops for 2 seconds, recording will pause. The LED lights when recording begins and blinks

during Record-Pause.

The recording activation level can be adjusted during VCVA recording with the Up/Down control on

the MENU switch. Perform a test recording and adjust the level between 1 and 30 to match the

recording environment.

The VCVA activation level differs depending on the sensitivity of the microphone. See page 30 for

details on the microphone sensitivity setting.

RECORDING INDEX SIGNALS

You can record index signals at important points during recording for instant access to those points

during playback.

Press the Index button during recording or Record-Pause.

[INDX] is displayed on the LCD panel for 2 seconds together

with the total number of index signals recorded.

The LED blinks during index signal recording.

Recording of the next index signal will not be accepted during the

2-second interval while an index signal is being recorded and the

LED is blinking

Up to 16 index signals can be recorded in each message.

ERASE SP DICT

DETECTING INDEX SIGNALS

When an index signal is detected during playback, [INDX] lights on the LCD panel.

If the Index button is pressed during playback, the recorder will skip to the next index signal in the

same message and then resume playback.

If the index button is pressed during fast forward, the recorder will forward skip to the next index

signal in the same message and stop.

If the index button is pressed during fast reverse, the recording will reverse skip to the previous

index signal in the same message and stop.

The skip operation will not occur if no index signal has been recorded before or after the current

position in the same message.