Olympus VN-900 Petunjuk Manual - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Perekam Suara Olympus VN-900. Olympus VN-900 6 halaman. Vn-900 mode d'emploi (fran栩s)
Juga untuk Olympus VN-900: Petunjuk (2 halaman), Petunjuk Manual (Spanyol) (6 halaman), (Prancis) Manuel (6 halaman)

Halaman Cetak

Inserting Batteries

Replacing Batteries

appears on the display, replace the batteries as

When

soon as possible. Size-AAA alkaline batteries are

recommended. When the batteries are depleted,

appears on the display, and the recorder shuts off.

It is recommended to set the HOLD switch to the HOLD

position before you replace batteries to maintain the current

settings (time/date, etc.). For your convenience,the recorder

also logs the current settings in nonvolatile memory at hourly

intervals.

Setting Time/Date (TIME)

If you have set the time and date, information as to when a sound file was recorded

is stored automatically with that file.

The time and date must be set to enable management of files in folder S, for the

alarm playback function, and for the scheduled alarm playback function.

When you install batteries for the first time or each time you replace the batteries,

the hour indication will flash. In such a case, be sure to set the time and date by

following steps 4 through 6 described below.

Press and hold the MENU/FOLDER button for

1 second or longer.

Press the 9/+ or 0/– button until "TIME" flashes

on the display.

Press the PLAY button.

The hour indicator flashes.

Press the 9/+ or 0/– button to set the hour.

Press the PLAY button to accept the hour.

The minute indicator flashes.

Repeat steps 4 and 5 to continue to set the minute, year,

month and date in the same way.

After setting the date, press the STOP button.

This completes the time/date setup procedure.

• You can switch the time indication between the 12-hour system and the 24-hour

system by pressing the DISPLAY button while you are setting the hour or minute.

(Example: 5:23 P.M.)

(Initial setting)

• You can change the order of the date indication by pressing the DISPLAY button

while you are setting the year, month, or day.

(Example: February 14, 2001)

(Initial setting)

• Each time you press the DISPLAY button while the recorder is stopped, the display

changes as follows (with folder A, B or C selected):

Time → Remaining recording time → Date → Time . . .

The selected indication appears on the display each time the recorder is stopped.

Notes

• If you leave the recorder untouched for 3 minutes or longer before pressing the STOP button

in step 6, Setup mode will be canceled, and any time/date settings you made will be canceled.

• If you press the STOP button during setup, time/date setup is canceled.

Lightly press down on the arrow and

slide the battery cover open.

Insert two size-AAA alkaline batteries,

observing the correct polarity.

Close the battery cover completely.

Time/Date screen appears. The hour

indicator flashes, indicating the start of the

Time/Date setup process. (See "Setting

Time/Date" for details)

a Battery indicator

Notes on the Folders

The recorder has four folders: A, B, C, and S.

To switch between folders, press the MENU/FOLDER button

while the recorder is stopped.

Each time you press the MENU/FOLDER button, the display

changes as follows:

A → B → C →S → A . . .

• Folders A, B, and C

Each recorded file is stored in a folder. Using folders to classify files makes it

convenient to find files you want to access later.

• Folder S

This folder has date subfolders* from January 1 to December 31. Up to 15 files

can be stored in each date subfolder, a useful feature for schedule management

by storing a certain day's schedule for future reference.

To switch between date subfolders, select the S folder, then press the 9/+ or

0/– button while the recorder is stopped.

Up to a total of 100 files can be recorded in folder S.

* There is one subfolder for each day of the year.

Folder A

Folder B

Maximum of 100 files in each folder

Total of 300 files

Press the MENU/FOLDER

button

Recording (REC)

New recordings are saved as the last file in the folder. For example, if you have

eight recordings in the Folder A, and you press REC, the new recording will be

recording number nine.

Press the MENU/FOLDER button to select the desired

folder (A, B, C or S).

When you select folder S, the current date subfolder

appears on the display.

If you select folder A, B, or C, go to step 3.

If you select folder S, press the 9/+ or

0/– button to select the desired date subfolder.

Set the recording mode (see "Recording Modes").

Set the microphone sensitivity (see "Microphone

Sensitivity").

Press the REC button to start recording.

The Recording/playing lamp lights, and recording

starts.

• If the recorder is placed directly on a table when recording a

meeting, it tends to pick up table vibrations. Put a notebook or

other item between the table and the recorder for clearer

recording.

• The Record/Play display lamp will turn red while recording.

Each time you press the DISPLAY button, the display switches between current recording

time and remaining recording time.

To stop recording, press the STOP button.

Notes

• When the remaining recording time becomes 5 minutes or less, the display changes to remaining

recording time automatically.

• Even if you press the DISPLAY button, the display will not change to current recording time if

the remaining recording time is 5 minutes or less.

• When remaining recording time falls to 1 minute or less, the Recording/playing lamp flashes.

• If "FULL" appears on the display, you cannot record in the selected folder. In such a case,

erase unnecessary files (see "Erasing from folder A, B or C" or "Erasing from folder S").

• There is one subfolder for each day of the year.

a Current folder

Folder C

Folder S (schedule)

File

Date subfolder

File

a Date to record

a Folder

b Current recording

mode

c Current file number

d Recording time

e Remaining

recording time