AXIWI AT-320 Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem stereo AXIWI AT-320. AXIWI AT-320 2 halaman. 6 persons two-way (duplex) communication
Juga untuk AXIWI AT-320: Panduan Pengguna (16 halaman), Panduan Pengguna (16 halaman)

AXIWI AT-320 Panduan Pengguna
With the AXIWI communication system, you have to setup 1 unit as a 'Master'. The other units
have to be set up as a 'Submaster' or a 'Follower', depending if you want to be able to talk
continuously or incidentally. In the 'Submaster' mode your speaking function is always activated.
In the 'Follower' mode you have to manually activate and deactivate your speaking function.

In order to set up the AXIWI you have
to make the following installation steps.
Set up as Master
1.Push and hold the volume + button.
2.Then push the 'on/off' button (at least 2
seconds) while pushing the volume + button
at the same time. The colour of the LED-light
indicates the channel.
3.The AXIWI unit is set up in the 'Master'
mode. The LED-light will light up constantly.
Set up as Submaster
1.Push and hold the volume - button.
2.Then push the 'on/off' button (at least 2
seconds) while pushing the volume - button
at the same time.
3.The AXIWI unit is set up as 'Submaster'. The
LED-light of the chosen channel will flash
quickly (quicker than in the 'Follower' mode)
and the other LED-lights will light up
constantly.
3. Channel LED
5. Multi-functional
'S' button
Set up as Follower
1.Push the 'on /off' button (at least 2 seconds).
The LED-light of the chosen channel will
flash. The AXIWI is set up as 'Follower'.
2.With the 'S' button on the front, the speaking
function can be activated and deactivated.
Press the 'S' button briefly to activate (and
again) to deactivate the speaking function.
3.When the speaking function is activated, the
LED-light of the chosen channel will flash,
the other LED-lights will light up constantly.
Change the channel
1.Push the volume up + button and hold it.
2.Push the 'S' button briefly at the same time.
Each time you push the 'S' button, the
LED-light will change to the next colour; the
next channel. When you have selected the
right/correct channel, release
the volume + button.
6. Volume -
7. On/off button
1. Headset port
2. USB-port
4. Volume +