Olympus BH-2 BHSU Pembongkaran, Pembersihan, dan Pemasangan Kembali Lengkap - Halaman 22
Jelajahi secara online atau unduh pdf Pembongkaran, Pembersihan, dan Pemasangan Kembali Lengkap untuk Mikroskop Olympus BH-2 BHSU. Olympus BH-2 BHSU 23 halaman. Sliding focus block
Halaman Cetak
cleaning with the cotton swabs, to avoid transferring
the grease further onto the guide rails. Keep at this
until all visible traces of grease have been scrubbed
from the parts. Thorough removal of this heavy grease
is important, since any exposed grease can lead to an
accumulation of dust and debris which might eventually
foul the sliding focus block mechanism.
The Prepared Guide Block is Ready to be Reinstalled
The prepared guide block, with the guide rails installed
into the side groove and held in place by the heavy
grease, is now ready to be reinstalled into the sliding
focus‐block mechanism (see Figure 70).
Figure 70 – Prepared guide block ready for reinstallation
Complete Teardown, Cleaning, and Reassembly of the Olympus BH‐2 Sliding Focus Block
Revision 2
Page 22 of 23