AXIWI AT-320 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Konferensi AXIWI AT-320. AXIWI AT-320 16 halaman. 6 persons two-way (duplex) communication
Juga untuk AXIWI AT-320: Panduan Pengguna (16 halaman), Panduan Pengguna (2 halaman)

Halaman Cetak
AXIWI AT-320 Panduan Pengguna
Master Mode – How to cut off the permission to speak function for all slave units:
1. Press and hold the volume down button for about 3-5 seconds on the master mode unit.
2. When the cut-off is made you can hear two beeping sounds through the headset of the master
mode unit.
The cut-off function is to allow the master mode unit to cut off the permission to speak mode from ALL
slave units. When active none of the slave units on the current channel can use the permission to
speak function.
Master Mode - How to release the cut-off of the permission to speak function:
1. Press and hold the volume down button for about 3-5 seconds on the master mode unit.
2. When the cut-off is released you can hear one beeping sound through the headset of the master
unit.
The user with the "Master" unit can switch off the Speak function of all slave units for a short moment.
If so, all slave units are being switched to the same channel, but this is not being communicated. All
units in "Slave" modus cannot use their speak
function.
-9-