Olympus BHTP Buku Petunjuk - Halaman 11
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mikroskop Olympus BHTP. Olympus BHTP 23 halaman. Polarizing microscope
Halaman Cetak
Summary
of
Putting
the
MScroscope in
Operation
Model BHTP
A. Match
the
line voltage selector switch to local mains voltage (see
page 10).
B. Switch on the light source.
C.
Place a specimen slide on the stage.
D.
Turn the Bertrand lens out and pull analyzer from the light
path.
E. Coarse focus with the 1 OX objective.
F. Make interpupillary and diopter adjustments (page 10).
G. Rrsh analyzer in and set the analyzer to optimum extinction position
(page 1 1).
H. Center the condenser (page 1
1).
I. Center the stage (page 12).
J.
Center objectives other than 1 OX (page 1 3).
K. Swing in the desired objective.
1.
Set the condenser, analyzer and Bertrand lens correctiy according to
your
microscopic purpose (pages 15 and 16).
M. Fine focus.
N.
Adjust aperture iris diaphragm
and field iris diaphragm
(page 14).
Adiustrnent
of
Illumination System
Bertrand lens
Microscopic
in intermediate
Condenser
application
Objective
top
lens
attachment
Orthoscopic
4X
to 10X
OUT
OUT
observation
20X to 100X
OUT
IN
Conoscopic
observation
Generally for biological use, however, remove the analyzer, Bertrand lens
and test plates from the light path.
Cut off this page at dotfed line and put
in
on the wall near the microscope for
use
as
a reminder of microscopic procedure.
OLYMPUS
9