Olympus BX3M-CB Petunjuk Manual - Halaman 34

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Mikroskop Olympus BX3M-CB. Olympus BX3M-CB 44 halaman. Control box/fm control box

5-2 Connection with PC

To control the system microscope from PC, the PC must be connected to the control box (BX3M-CBFM or BX3M-

CB) with the interface cable (USB cable or RS-232C cable). In addition, the application software to control the system

microscope must be installed on PC.

Connecting the interface cable

· Always use the USB cables and RS-232C cable interface

CAUTION

cables provided by Olympus. If you use the commercially

available USB 2.0 cables or hubs, the system operations

cannot be ensured.

· Be sure to connect cables when the main switch of BX3M-

NOTE

CBFM or the microscope and the power supply of PC are

turned OFF.

· Cables are vulnerable when bent or twisted. Never subject

them to excessive force.

· Connect the cables in the correct orientation paying

attention to the shape of the connector.

· You cannot connect the PC and the control box (BX3M-

CBFM or BX3M-CB) using both the USB cable and the RS-

232C cable.