Olympus BX51 Petunjuk Manual - Halaman 18

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Mikroskop Olympus BX51. Olympus BX51 40 halaman. System
Juga untuk Olympus BX51: Panduan Pengoperasian (17 halaman), Petunjuk Manual (34 halaman), Petunjuk Manual (37 halaman), Panduan Pengoperasian (11 halaman)

Fig. 18

Fig. 19

Fig. 20

Rotating the Stage

1. Slightly loosen the stage clamping screw @.

2. The stage can be rotated both clockwise and counterclockwise by the

stage clamping screw.

# A click may be heard and felt during rotation. However, this is due to

the construction of the substage and does not indicate a malfunc-

tion.

}The angle of rotation varies depending on the positions of the X- and Y-

axis knobs.

Right hand knobs

Left hand knobs

}By lowering the position of the substage, the microscope will accommo-

date specimens with maximum height of 35 mm. This is useful when

observing metallurgical specimens and other thick objects.

1 Lower the stage to the lower limit, then remove the stage from the micro-

scope.

2 Using the Allen screwdriver, loosen the substage bracket clamping screw

@ and remove the substage.

3. Turn the coarse adjustment knob and raise the focusing block ³ to

where the stopper screw ² on the arm becomes visible.

4. Using the Allen screwdriver, loosen and remove the upper stopper screw

².

5. Reattach substage bracket and stage.

Angle of Rotation

Clockwise

Counterclockwise

230°

20°

230°

(Fig. 18)

(Figs. 19 & 20)