Olympus BX53M-P Petunjuk Manual - Halaman 22

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Mikroskop Olympus BX53M-P. Olympus BX53M-P 36 halaman. Polarizing microscope

Fig. 24

FIg. 25

Cross lines ²

Conoscopic image @

Note: During conoscopic observation, the center of the conoscopic image

@ and the intersection of the cross lines ² may not coincide.

However, employment of the universal infinity optical design ensures

that this disagreement will have no measurable effect during actual

observation.

However, if the disagreement is distracting, adjust in the same manner

as when using the U-CPA (for photomicrography), described in the

following paragraph.

When Using Intermediate Attachment for conoscopic and

orthoscopic observation (U-CPA)

· Photomicrography

1. Using the tip of a mechanical pencial, etc., push out, in the direction of

the objective hole, the black rubber plugs inserted into the centering

holes of the primary hole where the 20X or 10X objective is inserted.

2. Pull out the Bertrand lens knob @ to the pulled-out (¦) position. (Fig. 25)

3. Adjust the position of the intermediate tube (Refer to page 7.)

4. Center the condenser. (For details, see instructions of each microscope.)

5. Push in the Bertrand lens knob @ to the pushed-in (

conoscopic observation.

{

) position for