Olympus BX60 Petunjuk Manual - Halaman 11

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Mikroskop Olympus BX60. Olympus BX60 48 halaman. System microscope
Juga untuk Olympus BX60: Panduan Memulai Cepat (4 halaman)

Halaman Cetak

Attaching the Lamp Housing

to the Microscope

| Transmitted Light Lamp Homing |

(Figs. 11.

12.13)

fig, 11

1. Using the Allen screwdriver, fully loosen the lamp housing clamping

screw © on the microscope.

2. Insert the lamp housing eoUactor unit mto the microscope unU it touches

tha lamp housing bracket on the back of tha base (lower part), then

tighten the clamping screw © (Fig. 11)

Rg. 12

| Reflected Light Lamp Homing

1. Using the Allen screwdriver, fully loosen the lamp housing damping

screw © on the reflected Tight port on the microscope. (Fig. 12)

2. Insert the lamp housing collector unit into the lamp port unfl it touches

the lamp housing bracket on the back of the base (upper pan), than

tighten the clamping screw ®. (Fig. 13)

3. Insert the cord plug from the transmitted light lamp housing securely

into tha power outlet ©. Insert the cord plug from tha reflected light

Fig. 13

Fig. 14

Mounting the Objectives

(Fig. 14)

C For reflected tght observation, make sure to mount metallurgical UIS

objectives.

Mount the objectives on the revolving nosepiece in such a manner

lhat the magnification increases from tow to high power in a clockwise

direction.

(Fig. 14)