Olympus CHB Buku Petunjuk - Halaman 6

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mikroskop Olympus CHB. Olympus CHB 15 halaman.

Halaman Cetak

III. ASSEMBLY

The picture below illustrates the sequential procedure of assembly. The numbers indicate

the assembly order of various components.

Take care at assembly to keep all glass surfaces clean and avoid scratching the lens surfaces.

® Eyepiece cap

knob of

~'"

Securely attach the mechanical

II\.

(J) Eyepiece

stage to the plain stage with

""">

the clamping screws and tighten

""-

them with a coin.

Observation tube

Objective

Observation tube

clamping screw

Mechanical stage

Stand

---------~g~~g~O~L-®~9~connect

the plug to

Clamping screws

th~outlet.

Condenser

Line cord

~~~

Filter mount

Pull down the locking

the lamp house cover.

Aligning the positioning dots on

condenser mount and condenser,

insert the condenser into the

mount from below and clamp

with condenser clamping screw.

Tungsten bulb

20WCHB

For CHB

®::J

Halogen

Lamp socket

bulb

CH-LSHB

ForCHA

0 - -

For CHA

Tungsten bulb

6V10W

Q:::J

After opening the lamp house

cover at the microscope base,

press the tungsten bulb socket

against the lamp mount, and

rotate clockwise.

For use of a halogen bulb, insert

its contact pins into the socket.

In case of the tungsten bulb, its

silver reflecting surface must be

positioned pointing to the base

plate.

Before use, wipe off fingerprints

or stains on the resPective bulbs.