Olympus CX21 Petunjuk Manual - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Mikroskop Olympus CX21. Olympus CX21 28 halaman. Education microscope
Juga untuk Olympus CX21: Panduan Pemeliharaan (25 halaman)

Halaman Cetak

IMPORTANT

SAFETY PRECAUTIONS

Safety Symbols

The following symbols are found on the microscope. Study the meaning of the symbols and always use the equipment

in the safest possible manner.

Symbol

1. After the equipment has been used in an observation of a specimen

2. To avoid potential shock hazards and burns when replacing the lamp

Fig. 1

3. Install the microscope on a sturdy, level table or bench so as not to block

4. Always use the power cord provided by Olympus. If no power cord is

5. When installing the microscope, route the power cord away from the

6. Always ensure that the grounding terminal of the microscope and that

7. Never allow metallic objects penetrate into the air vents of the micro-

8. After operation or in case of abnormality, be sure to disconnect the power

Indicates that the surface becomes hot, and should not be touched with bare hands.

Before use, carefully read the instruction manual. Improper use could result in personal injury to

the user and/or damage to the equipment.

Indicates that the main switch is ON.

Indicates that the main switch is OFF.

that is accompanied with a potential of infection, clean the parts

coming in contact with the specimen to prevent infection.

· Moving this product is accompanied with the risk of dropping the

specimen. Be sure to remove the specimen before moving this prod-

uct.

· In case the specimen is damaged by erroneous operation, promptly

take the infection prevention measures.

bulb, set the main switch 1 to "

from the wall outlet in advance. Whenever you replace the bulb during

use or right after use, allow the lamp socket 2 and bulb to cool before

touching. (Fig. 1)

Applicable lamp bulb: 6V20WHAL halogen bulb (Philips Type 7388)

the air vents on the underside of the base.

Do not place the microscope on a flexible surface, as this could result in

blocking the air vents and cause overheating or a fire.

provided, please select the proper power cord by referring to the section

"PROPER SELECTION OF THE POWER SUPPLY CORD" at the end of

this instruction manual. If the proper power cord is not used, product

safety performance cannot be warranted.

microscope frame. Should the power cord come in contact with a hot

part, the power cord could melt and cause electric shock.

of the wall outlet are properly connected. If the equipment is not grounded,

Olympus can no longer warrant the electrical safety performance of the

equipment.

scope frame as this could result in electrical shock, personal injury and

equipment damage.

cord from the connector on the microscope or from the wall power outlet.

Explanation

" (OFF) then disconnect the power cord