Olympus IX81-ZDC2 Petunjuk Manual - Halaman 14

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Mikroskop Olympus IX81-ZDC2. Olympus IX81-ZDC2 16 halaman. Focus drift compensating microscope

Halaman Cetak

SPECIFICATIONS

Item

Applicable microscope frame

Applicable observation tubes

Applicable control box

Controller

Focus detection method

Applicable objectives

Observation method

Field number

AF focusing speed

(One-shot focus mode only)

AF repeatability

Dimensions & weight

Operating Environment

IX81F-ZDC2, IX81S1F-ZDC2

U-BI90-CT, U-BI90, U-TBI90, U-TR30H (in combination with the IX-ATU)

IX2-UCB (Control board and Application Software for PC (see page 1) are required.)

Pupil-division reflection active autofocusing using a laser diode and 2-division detector.

Laser diode: 785 nm (Class 1: IEC60825-1, Class I : CDRH)

Laser pulse duration: 0.5 to 2.5 ms.

Frequency: 100 Hz. Momentary maximum output power; 127.5 [µW]

Refer to the list of applicable objectives (page 4).

Reflected light fluorescence observation is recommended. TIRF. DIC (compatible only with

one-shot focus)

* The focus drift compensation function is not applicable to the phase contrast and polarized

light observations.

Approximately 1 to 5 sec. from the focusing range (Excluding the offset drive time)

(Note: The AF speed may slow down depending on the PC setup.)

· 20X and 40X objectives:

±0.1 µm (with constant temperature),

±0.17 µm (with less than 5°C temperature change)

· 60X objective or 40X/60X/100X oil-/water-immersion objectives:

±0.07 µm (with constant temperature),

±0.1 µm (with less than 5°C temperature change)

IX81-ZDC2 system : 303 (W) x 313 (H) x 434 (D) mm., 19.2 kg (42.2 lb)

AF sensor unit : 76 (W) x 76 (H) x 201 (D) mm., 0.9 kg (2 lb)

* Image-forming lens section/excluding the connector

· Indoor use.

· Altitude: Max. 2000 meters.

· Ambient temperature: 18 to 40°C (64.4 to 104°F)

· Maximum relative humidity: 80% for temperatures up to 31°C (88°F), decreasing linearly

through 70% at 34°C (93°F), 60% at 37°C (99°F), to 50% relative humidity at 40°C (104°F).

· Supply voltage fluctuations: ±10%.

· Pollution degree: 2 (in accordance with IEC60664)

· Installation (overvoltage) category: II (in accordance with IEC60664)

Specification