Olympus MX61L Panduan Perakitan - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Perakitan untuk Mikroskop Olympus MX61L. Olympus MX61L 49 halaman. 200mm/300mm compatible semiconductor/fpd inspection microscopes

Halaman Cetak

IMPORTANT

These microscopes employ a UIS2 (UIS) (Universal Infinity System) optical design, and should be used

only with UIS2 (UIS) eyepieces, objectives, observation tubes, etc. Less-than-optimal performance may

result if inappropriate accessories are used.

The MX61L microscope is compatible with a stage stroke of 300 mm (12 inches) and the MX61

microscope is compatible with that of 200 mm (8 inches).

SAFETY PRECAUTIONS

Fig. 1

1. Always use the power cord provided by Olympus. If no power cord is

provided, please select the power cord by referring to the section "PROPER

SELECTION OF THE POWER SUPPLY CORD" at the end of this instruction

manual. If the proper power cord is not used, Olympus can no longer

warrant the electrical safety performance of the equipment. Lay out the

power cord at a sufficient distance from the sources of heat such as the

power supply unit/light source and lamp housing to avoid contact with

these heat sources.

2. To avoid potential shock hazard, always set the main switch @ to

and disconnect the power cord before replacing the burner or connecting/

disconnecting motorized parts. And since the system contains motorized

parts, do not plug in the power cord until all of the assembly procedures

have completed.

}Always use the lamp bulb or burner supplied by Olympus.

Bulb/Burner

Halogen bulb

· 12V100WHAL-L (Long life type)

(PHILIPS 7724)

· 12V100HAL (High-resolution type)

(PHILIPS 7023)

· USH-103OL

Mercury burner

(USHIO)

· HBO103W/2

(OSRAM)

Xenon burner

· UXL-75XB-A

(USHIO)

Halogen bulb for

· JCR12V-100WB

light guide light

(USHIO)

source

3. Do not light the mercury or xenon burner while it is not mounted on the

microscope because the UV rays in their light are harmful to your eyes.

The used mercury burner should be disposed of as an industrial waste.

If you cannot dispose of it properly, contact Olympus.

4. The eye point of this microscope can be adjusted in the range between

408 and 560 mm above the desktop surface. Prepare a microscope

desk with an optimum height for the application of the customer.

Model

Average Life

2000 hrs.

50 hrs.

300 hrs.

200 hrs.

1000 hrs.

(OFF)