Olympus U-25ND6 Petunjuk Manual - Halaman 32

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Mikroskop Olympus U-25ND6. Olympus U-25ND6 42 halaman.

Halaman Cetak

ASSEMBLY

9-1 Assembly Diagram

The diagram below shows the sequence of assembly of the various modules. The numbers indicate the order of

assembly.

The module numbers shown in the following diagram are merely the typical examples. For the modules with which the

module numbers are not given, please consult your Olympus representative or the catalogues.

# When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching any

parts or touching glass surfaces.

Assembly steps enclosed in

}All assembly operations are possible by using the Allen screwdriver (

Allen wrench (

) provided with the motorized reflected light illuminator is used only for clamping the screws inside the

illuminator. (To retain the performance, have your local Olympus representative conduct this work.)

NOTES

· Be sure to insert the sliders in the orientations shown in the diagram. Otherwise, they cannot be fitted in click positions

and engaged correctly in the light path.

Eyepiece

Turret

UV cut Plate

Fluorescence

mirror units

Objectives/Motorized

revolving nosepiece

Light shield sheets

will be detailed on the subsequent pages.

Mercury burner

USH102D

HBO103W/2

Observation

tube

Lamp housing

clamping screw

Illuminator

clamping

screws

Motorized reflected

fluorescence

illuminator

BX-RFAA

Microscope frame

BX61TRF

BX62TRF, etc.

) provided with the microscope. The

Mercury lamp

housing

U-LH100HG

U-LH100HGAPO

Exciter balancer

U-EXBABG

U-EXBAUB

U-EXBAUG

ND filters

U-25ND6

U-25ND25

Rectangular field stop

BX-RFSS

6-position filter slider

U-RSL6

Analyzer

U-AN

6-position barrier filter slider

U-AN360-3

U-RSL6EM

Power cord

Power supply unit

(for 100 W mercury

burner)