Olympus FC-WR IM012 Petunjuk Manual - Halaman 9
Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Aksesori Kamera Olympus FC-WR IM012. Olympus FC-WR IM012 19 halaman. Wireless radiowave commander
Halaman Cetak
Shooting with Automatic Flash Control
(TTL Mode)
The TTL mode adjusts the fl ash level according to the brightness through the
camera lens. You can use this mode with cameras that support the Olympus TTL
mode. Refer to the Olympus website for a list of compatible cameras.
1
Press the MODE button. Then, turn the dial to
select TTL. Press the OK button to confi rm.
2
Set the fl ash compensation (+/-).
Press the a button to highlight +/- RATIO. Then, turn the dial to adjust the
setting.
• You can set a fl ash compensation from -5 to +5.
Press the OK button.
Manually Setting the Flash Intensity
(M Mode)
The fl ash will fi re at the selected intensity. You can use this mode with cameras
that do not support the Olympus communication feature.
1
Press the MODE button. Then, turn the dial to
select M. Press the OK button to confi rm.
2
Set the fl ash intensity (RATIO).
Press the a button to highlight RATIO. Then, turn
the dial to adjust the setting.
• You can set a fl ash ratio from 1/1 to 1/128.*
*1 You can select 1/2 EV or 1/3 EV for the adjustment
increment. (P. 28)
*2 On the scale display, t is the current selection. u is the
previous setting.
Press the OK button.
MODE
TTL
A
TTL
B
M
1/128
C
MODE
TTL
A
TTL
B
1/100
M
C
MODE
TTL
A
TTL
B
1
M
1/100
C
Scale display*
RATIO
FP
CH
1
0.0
Off
0.0
RATIO
FP
CH
1
0.0
Off
0.0
RATIO
ZOOM
LED
1/128
0.0
1/64
0.0
1/32
2
25
EN