Olympus PPO-E02 Buku Petunjuk - Halaman 8

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Aksesori Kamera Olympus PPO-E02. Olympus PPO-E02 10 halaman. Underwater lens port for the pt-e series
Juga untuk Olympus PPO-E02: Bagan Sistem (1 halaman)

Halaman Cetak

Maintenance

For safe use of this product, always perform maintenance after each diving session.

For details, refer to "Handling After Shooting" and "Maintaining the Waterproof Function" in the PT-E series

case instruction manual. Apply the same procedures to this product.

After shooting, remove the inserted cam-

era and lens, then re-seal the empty

case and immerse it in tap water to

remove any salt as soon as possible.

Remove the O-rings from this product

using the provided pick for removing

O-rings. Take care not to damage the

O-rings.

If any foreign matter is attached to the

O-ring grooves, remove it using a

clean, lint-free cloth or cotton swab.

Also remove any foreign matter from

the O-ring contact surfaces and from

the port mount thread on the PT-E

series case.

After making sure that the PT-E series

case is completely dry, dismount this

product from the case.

Remove sand and dust from the O-rings.

Pinch each O-ring between your fingers

and lightly rub the entire circumference

to check for foreign matter, scratches

and cracks.

After removing foreign matter, apply the

provided grease to the O-rings and fit

them into the O-ring grooves.

To apply grease to each O-ring, squeeze

a drop of grease about the size of a

grain onto your finger and lightly rub the

entire circumference of the O-ring to

spread the grease thinly and evenly.

E-7