Olympus PPO-EP02 Buku Petunjuk - Halaman 5

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Aksesori Kamera Olympus PPO-EP02. Olympus PPO-EP02 18 halaman.

Halaman Cetak

Chemicals which cannot

be used

Volatile organic solvents,

chemical detergents

Anticorrosion agent

Commercial defogging

agents

Grease other than

specified silicone grease

Adhesive

6 In the event that you discover that water has leaked into the product,

stop using the camera underwater immediately, remove any moisture

adhered to the product, remove the camera and lens from the Case,

and consult a service center.

7 Please remove the O-ring when traveling by air. Otherwise air

pressure may make it impossible to remove the rear cap.

8 To ensure safe use of the product, carefully read the instruction

manuals of the camera and the Case to which the product is attached.

9 When attaching this product to the Case, make sure that foreign matter

is not trapped between the O-ring and the contact surface as this can

adversely affect the waterproofing and result in leakage occurring.

0 When attaching this product to the Case, be sure to follow the

attachment method set out in this manual, ensuring that the

instructions are followed in the correct order.

a Before detaching this product from the Case, dry all parts fully and

check that no moisture is adhered.

b When storing this product, always detach it from the Case and fit the

front cover and the rear cap.

c When the Lens Port is not to be used for a long time, remove the O-

ring from the groove to prevent deformation of the O-ring, apply a thin

coat of silicone grease, and store it in a clean plastic bag or the like.

Do not clean the Lens Port with alcohol, gasoline,

thinner or other volatile organic solvents or with

chemical detergents etc. Use pure water or

lukewarm water.

Do not use anticorrosion agents. Wash with pure

water.

Do not use commercial defogging agents. Always

use the specified desiccant silica gel.

Use only the specified silicone grease for the

O-ring, as otherwise the O-ring surface may

deteriorate and water leakage may occur.

Do not use adhesive for repairs or other purposes.

When repair is required, please contact a dealer or

a service station of OLYMPUS CORPORATION.

Explanation

EN 21