Olympus PT-030 Buku Petunjuk - Halaman 16

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Aksesori Kamera Olympus PT-030. Olympus PT-030 44 halaman. Underwater case

Removing the hot shoe cable cap

To perform TTL flash shooting when this case is used, connect the

hot shoe cable provided with the optional electronic flash case to the

connector on this case and the camera's hot shoe.

Turn the hot shoe cable connector cap

inside the case counterclockwise to

remove it.

Insert the connector of the hot shoe cable

into the case's connector and turn the

connector screws all the way clockwise to

connect them firmly.

Insert the hot shoe on the hot shoe cable

into the hot shoe on the camera.

When not using the hot shoe cable, attach

the hot shoe cable cap to the hot shoe cable

connector inside the case and turn the cap

all the way clockwise to attach it firmly.

CAUTION

: • Be sure to remove the camera from the case when

inserting the connector of the hot shoe cable into the

case's connector.

To facilitate attachment and removal of the TTL cable and TTL

connector, apply the silicone O-ring grease (provided with this Case),

to the threaded section.

For details, see the maintenance description on page E-35 of this

manual.

CAUTION

: • The SP-310 camera cannot be used in combination

with the separately available electronic flash case.

E-15