Olympus IPLEX FX Panduan Referensi

Jelajahi secara online atau unduh pdf Panduan Referensi untuk Peralatan Medis Olympus IPLEX FX. Olympus IPLEX FX 3 halaman. Industrial videoscope

Halaman Cetak

Industrial Videoscope

IPLEX FX/LX STEREO

MEASUREMENT

REFERENCE GUIDE

PREPARATIONS FOR STEREO

MEASUREMENT

• Attach a stereo optical adapter to the distal end of a

scope while the live screen is displayed.

Select the stereo optical adapter to be used in the

adapter selection screen, and press the [MEAS/ENTER]

joystick.

Confirm the name of the stereo optical adapter and the

set number, and then select "OK". Press the

[MEAS/ENTER] joystick.

• When using a stereo optical adapter for the first time,

installation will be required. Select the [NEW STEREO

ADAPTER] option from the menu and follow the

on-screen directions. For full details please refer to the

instruction manual.

MEASUREMENT METHOD (MEASUREMENT MODE)

• Immediately after executing stereo measurement or

selecting "METHOD" in the stereo measurement

screen, the measurement method (measurement mode)

selection screen is displayed.

• Refer to the following page for the usable measurement

method (measurement mode). (Some functions are not

available for LX.)

SPOT RANGING —

OBJECT DISTANCE MEASUREMENT

• Tilt the [ZOOM] lever toward [W] to activate the

measuring distance to object function.

• Highest accuracy is achieved when green zone is

displayed in object distance. To achieve highest

measurement accuracy, bring the insertion tube to an

object as close as possible.

• Push the

[MEAS/ENTER]

joystick to proceed

to the stereo

measurement

screen.

• Object distance is

ceaselessly

displayed in the

stereo

measurement

screen.

Measurement

Object distance

point cursor