Olympus CIX100 Manual Pengaturan Sistem - Halaman 14
Jelajahi secara online atau unduh pdf Manual Pengaturan Sistem untuk Peralatan Laboratorium Olympus CIX100. Olympus CIX100 38 halaman. Cleanliness inspector system
Juga untuk Olympus CIX100: Panduan Instalasi (14 halaman), Petunjuk Manual (46 halaman)
Halaman Cetak
OLYMPUS Cleanliness Inspector CIX100
4 Setting up the system
Caution
Always use the power cord provided by Olympus.
The electrical safety and electromagnetic compatibility of the device can not
be guaranteed if an unsuitable power cord is used. If no suitable power cord
has been provided, you can find details of suitable power cords on page 32
of the "Proper selection of the power supply cord" chapter.
Caution
Always make sure that the device is properly grounded.
The safety and electromagnetic compatibility of the devices can not be
guaranteed if they are not grounded.
Caution
Tripping hazard!
Cables laid across a room can be a dangerous tripping hazard.
Lay the cables so that they don't present a tripping hazard and will not get
damaged.
Connecting the monitor to the computer
Figure 5: The back of the monitor
System Setup Guide
1. Plug one end of the DVI cable into the port on the monitor (1) and the
other end of the cable into the port on the computer.
2. Plug the USB 2.0 cable into the USB 2.0 port on the monitor (2) and
plug the other end of the cable into a USB 2.0 port on the computer.
1
DVI port
2
USB 2.0 port
3
Port for the power cord
3. Connect the monitor's power cord with the power adapter.
4. Plug the power adapter into the port on the monitor (3).
14