AccuLine 40-6680 Panduan Servis - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Servis untuk Aksesori AccuLine 40-6680. AccuLine 40-6680 16 halaman. 5 beam laser pointer
Juga untuk AccuLine 40-6680: Buku Petunjuk (13 halaman)
Halaman Cetak
2.1 Body Module Disassembly (AP1823)
Item
JLT Part #
5-1
AP1491
M2 x 8 Cross Plate Screw
5-2
AP1825
Power Switch
5-3
AP1826
Main PCB
5-4
AP1475
M2 x 5 Cross Plate Screw
5-5
AP1682
M2.5 x 14 Cross Plate Screw
5-6
AP1827
Core Module
5-7
AP1491
M2 x 8 Cross Plate Screw
5-8
AP1828
Compensator Lock Springs
5-9
AP1829
Compensator Lock
5-10
AP1449
M2.5 x 6 Cross Plate Screw
5-11
AP1830
Baseboard Part
5-12
AP1831
Bottom Part
1.
Using a soldering iron, de-solder the wires that connect the
power switch (5-2) and the main circuit board module (5-3).
2.
Using a Phillips screwdriver, remove 2 cross plate screws
M2×8(5-1) and remove the power switch (see figure 4)
3.
Using a soldering iron, de-solder the wires that connect core module (5.6) and the main circuit board (5-3).
4.
Using a Phillips screwdriver, remove 2 cross-slot plate screws M2×4(5-4), then remove the main circuit board module (see
figure 5).
5.
Using a Phillips screwdriver, remove 2 cross-slot plate screws M2×8(5-7) and 4 cross-slot plate screws M2.5×14(5-5),
then remove the core module (see figure 6)
6.
Meanwhile, remove the press ring (5-9) and two press springs (5-8). Reference figure
7.
7.
Using a Phillips screwdriver, remove 4 cross cross-slot plate screws M2.5×6 (5-10),
then remove the baseboard part (5-11) and base part (5-12). Reference figure 8.
5- 1
Figure 4
5- 8
5- 9
Prepared By: Tim Wojo
Description
Qty
2
1
1
2
2
1
2
2
1
4
1
1
5- 2
Figure 5
Figure 7
Revision - Date: 0 – 20080430
40-6680 Service Manual
5- 8
5- 9
5- 1
5- 7
5- 11
5- 12
5- 3
5- 4
Figure 6
5- 7
5- 10
5- 11
5- 12
Figure 8
5- 5
5- 6
5- 10
5- 3
5- 4
5- 2
5- 5
5- 6
Page 3 of 16