Axminster MCB100A Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Melihat Axminster MCB100A. Axminster MCB100A 20 halaman. 4" metal cutting bandsaw

MAINTAIN GEAR TRANSMISSION

The gears of the transmission system

equipped with this machine are made of a

special kind of steel.

The quality insures that the gears will be

more sturdy and durable. In order to keep the

performance as perfect as they are designed

for. We suggest that a lubricant shall be

required for them every three months. To

fulfill the job follow the steps as below.

1. Loosen the screw (A) in Fig. 8 with a

8mm Hex. wrench.

2. Remove the wheel (B), then lubricate the

gears with Anti-high heat grease.

3. Replace this wheel with care, then tighten

the screw (A) properly.

The tension device of this machine is

designed for the ready service basis. All you

have to do is hold the handle (B) in Fig. 6 to

control blade tension by giving turn to

increase or decrease tension as you wish

during machine in operation. The major

function of it is to present a perfect cut,

because it can make the blade work on

constant tension. Furthermore, attached with

the tension system, there are a couple of

compression springs which are made for

decreasing the blade backlash. Consequently,

it is for sure to extend life of the blade.

WARNING

SHUT OFF THE POWER SOURCE

BEFORE

MACHINE

ADJUSTMENT, MAINTENANCE, OR

REPAIRMENT.

Fig.8

BEFORE STARTING

MAKE SURE LOOSEN THE LOCK

PLATE BETWEEN THE SAW ARM AND

BED TO RELEASE THE SAW. AFTER

SERVICE, REMEMBER IT MUST BE

REPLACED BACK FOR SAFETY AND

EASY CARRYING.

RUNNING