Alphacom a300 Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon Alphacom a300. Alphacom a300 20 halaman. Range headsetphone

Halaman Cetak

With some PABX's, it is necessary after dialling an outside line access digit (often 9) to

wait for new dial tone before dialling the outside number. If the PAUSE button is press

after the access digit has been dialled, the number may be dialled immediately without

14.12

MIXED DEAl MODE OPERATION

waiting for new dial tone as the telephone will introduce the required pause in the

STORING MIXED DIAl MODE NUMBERS

dialling sequence. In some cases it may be necessary to introduce a second pause, but

If you are connected to an exchange requiring pULSE dialling and you wish

not enter more than 2 pauses or unsatisfactory operation may result.

to route your calls via an alternative carrier (if available), it is necessary to

12.12 MIXED DEAL MODE OPERATION

dial an ACCESS code in pULSE mode followed by a pause and then an

STORING MIXED DIAL MODE NUMBERS

AUTHORISATION code in TONE mode. Since the telephone numbers of all

If you are connected to an exchange requiring PULSE dialling and you wish to route

calls to be re-routed via the alternative carrier will have to be preceded by

your calls via an alternative carrier (if available), it is necessary to dial an ACCESS code

the same access and authorisation codes, it is convenient to store them in a

in PULSE mode followed by a pause and then an AUTHORISATION code in TONE

memory location.

mode. Since the telephone numbers of all calls to be re-routed via the alternative carr

For example, if your access code is 123 and your authorisation code is

will have to be preceded by the same access and authorisation codes, it is convenient

4567890 and you wish to store the combined codes in memory location

store them in a memory location.

M1, you would proceed as follows:-

For example, if your access code is 123 and your authorisation code is 4567890 and y

1. Seize the line in any mode.

wish to store the combined codes in memory location M1, you would proceed as

follows:-

2. press STORE button once.

Seize the line in any mode.

3. Key in 123

Press STORE button once.

4. press TONE button (this changes the dialling mode to tone)

Key in 123

5. press pAUSE button to introduce a pause, Note that it may be necessity

Press TONE button (this changes the dialling mode to tone)

to introduce a second pause but do not enter more than 2 or incorrect

Press PAUSE button to introduce a pause, Note that it may be necessity to

operation may result.

introduce a second pause but do not enter more than 2 or incorrect operation m

result.

6. Key in 4567890

Key in 4567890

7. press M1 button

Press M1 button

8. Release the line.

Release the line.

During the storing process, the number will be displayed in the LCD.

1 2 3

To dial a number via the alternative carrier, lift handset or press Speaker button, await

To dial a number via the alternative carrier, lift handset or press Speaker

dial tone, press M1 button and then dial the telephone number you are calling.

button, await dial tone, press M1 button and then dial the telephone number

Alternatively, press the M1 button followed by another memory button if the called

you are calling. Alternatively, press the M1 button followed by another

number is stored in a memory location.

memory button if the called number is stored in a memory location.

14.13

RECAll BUTTON

This is generally only used when the telephone is connected to a pABX

(private Automatic Branch Exchange) and gives access to features provided

by that exchange. However, RECALL is becoming a feature on the new

digital exchanges to give access to new services such as some of BT's

Network Services.

For full information on the use of the RECALL button, please consult your

pABX instructions or your Network Operator providing the services.

For setting the correct RECALL mode, please refer to section under

'INSTALLATION'.

4 5 6 7 8 9 0

-12-