Axminster RBG250ID Engineer Series Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penggiling Axminster RBG250ID Engineer Series. Axminster RBG250ID Engineer Series 7 halaman. Bench grinders

Halaman Cetak
It has the danger of getting an electric
shock.
Safety Instruction
When using power tools, please observe
the safety instructions for national power tool
to reduce fire disaster, electric shock and
serious personal injury. Please read this manual
carefully before using this kind of machine.
General Instruction
1. Keep work area clean
Massy work area and table may cause
accident.
2. Keep work environment well
Don't use this tool in damp location
or below 0℃, and keep the illume well.
Don't use the tools in the presence
of flammable liquids or gases.
3. Dress properly
Don't
wear
decorations, which may get caught in
moving parts. Wear protective hair
covering to contain long hair.
4. Wear safety glasses
Safety glasses or dust mask are
necessary to prevent the dust and
splashing grain flying into eyes in
the manufacturing process.
5. Keep children away
Don't let others especially the
children under 16 years old make
contact with the tool.
6. Use the tool correctly
Don't force the miniature tool or
accessories to do the job which should
be done under the heavy tool.
loose
clothes
7. Keep the tools carefully
Please keep the tools clean and in
safe operation.
8. Repair or replace
according to eh manual
Checking the main parts frequently. A
part that is damaged should be repaired
by an authorized person.
Electricity Safety
Before connect the tool to the electric
power, check whether the voltage of the
local electrical source is in accordance with that
marked in the label.
and
Tool instruction
This bench grinder is specially
designed for burnishing or polishing
metal knives and other metal materials,
This machine can do professional
burnishing.
working, it can continue unload working
spasmodically or turn off for cooling.
instructions for picture(D,E)
1. inner flange
grinding wheel
2.
outer flange
3.
nut
4.
outer guard of the grinding wheel
5.
the accessories
After
30
minutes'load