AXMINSTER WORKSHOP AW37E Manual Petunjuk Asli - Halaman 5

Jelajahi secara online atau unduh pdf Manual Petunjuk Asli untuk Scrubber AXMINSTER WORKSHOP AW37E. AXMINSTER WORKSHOP AW37E 17 halaman. 1hp extractor

Halaman Cetak

DO NOT use this machine as a vacuum cleaner, try to

keep the waste medium to wood by-products.

DO NOT uplift workshop floor debris (stones, nails,

screws, paper etc., etc). Be aware that wood dust is an

explosive medium.

DO NOT allow any 'naked light' source to occur

anywhere near the machine. This includes cigarettes,

matches, etc, and do not place the machine near

any unprotected light bulbs, that could possibly get

broken.

The suction force is generated by a high speed fan

unit. This has the potential to amputate fingers, grab

loose clothing (ties etc.,) and 'bat' large chips etc, at

high speeds. Keep all guarding in place, and if access

to the fan becomes necessary (due to blockage etc.,)

disconnect the machine from the mains supply

and ensure the fan has come to a complete stop

before putting your hands anywhere near it.

If you are not using 'clear' extraction hose, periodically

remove the hose to check that the inlet to the

machine is not getting restricted. The safety guard

grill of the inlet duct can be particularly irksome

in this way, as long strand shavings etc., can wrap

around the grill fret.

UNDER NO CIRCUMSTANCES

SHOULD CHILDREN BE ALLOWED

IN WORK AREAS. KEEP THE WORK

AREA AS UNCLUTTERED AS IS

PRACTICAL, THIS INCLUDES

PERSONNEL AS WELL AS

MATERIAL.

SPECIFIC SAFETY FOR DUST EXTRACTORS

KEEP the particle filter clean. The machine relies on

its ability to 'blow' air through the filter to generate

good suction. If the particle filter starts to clog this

reduces the air flow and the machine becomes less

efficient.

The particle filter can be cleaned by using an 'M' class

vacuum cleaner clean the inside of the filter.

BE AWARE that in dry air periods or areas the

movement of the air through the machine can

generate static electric fields. These are not normally

a problem as the machine is bonded together via its

construction and the whole is earthed back through

the electrical supply. Problems can occur, however

with isolated items such as stands or hosing that are

insulated from the ground (standing on rubber feet,

suspended in the air etc). If possible, try to connect

everything together electrically to eliminate static

shocks. Use the integral metal coil in flexible hosing

to connect the units together.

Try to route the power cable and the hosing away

from busy walkways.

WARNING! KEEP TOOLS AND

EQUIPMENT OUT OF THE REACH

OF YOUNG CHILDREN.

ONLY USE DUST EXTRACTION

BAGS WITH THIS MACHINE NOT

DOMESTIC WASTE BAGS!