Axometrics AXOSTEP-APM-65 Panduan Instalasi - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Alat Ukur Axometrics AXOSTEP-APM-65. Axometrics AXOSTEP-APM-65 17 halaman. Axostep panel mapper for 65’’ horizontal samples

Halaman Cetak
5

Tunable Light Source

5.1

Light Source Installation

1. To remove the Tunable Light Source (TLS) there are mounting bolts that are holding the TLS in
the drawer. Remove the four bolts with a 5mm Allen Wrench. Refer to figure 19.
2. Once you have installed the Lamp, slide the TLS in the drawer.
3. Plug in the Power cable that is labeled LIGHT SOURCE PWR.
4. Connect the Serial cable.
5. Slide the Light Source up against the fan shroud, so it will properly pull the heat from the TLS.
Fig.19
Tunable Light Source
Drawer locking screws
11