Axon Synapse CDV08 Panduan Teknis - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Teknis untuk Penguat Axon Synapse CDV08. Axon Synapse CDV08 18 halaman. Analog video distribution amplifiers

Halaman Cetak

2 Unpacking and Placement

Unpacking

The Axon Synapse card must be unpacked in an anti-static

environment. Care must be taken to NOT to touch component on

the card – always handle the card carefully by the edges. The card

must be stored and shipped in anti-static packaging. Ensuring that

these precautions are followed will prevent premature failure from

components mounted on the board.

Locating the card

The Synapse card can be placed vertically in an SFR18 frame or

horizontally in an SFR04 frame. Locate the two guide slots to be

used, slide in the mounted circuit board, and push it firmly to

locate the connectors.

Correct insertion of card is essential as a card that is not located

properly may show valid indicators, but does not function

correctly.

REMARK: On power up all LEDs will light for a few seconds, this

is the time it takes to initialise the card.