ALPhANOV AeroDIODE TOMBAK Catatan Aplikasi - Halaman 3

Jelajahi secara online atau unduh pdf Catatan Aplikasi untuk Penggerak DC ALPhANOV AeroDIODE TOMBAK. ALPhANOV AeroDIODE TOMBAK 6 halaman.

4. Cabling

1. Plug the USB-Jack cable in the "USB In" connector

2. Plug the signal you want to convert in the "Pulse In" SMA connector

3. The upgraded signal will output on the "Pulse Out" SMA connector

4. Finally, plug the power supply to the "Power In" connector to power on the

board

Output signal

Input signal

5. Software configuration

Launch the ALPhANOV Control Software and click on Connect to start the TOMBAK

hardware detection. The software automatically detects the TOMBAK board.

A window will appear for each TOMBAK connected to the computer.

USB-Jack

Cable

Upgraded signal

Page 3/6 – v2.0

Power

Supply