Cinegears CG-FC831 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengontrol Cinegears CG-FC831. Cinegears CG-FC831 9 halaman. Wireless follow focus controller

Halaman Cetak

Setting Controller Modes

M-Normal Mode

Press and hold (REC) + (A) to switch to M-Normal mode. In
M-Normal mode, user can set vibration points, and move controller beyond set
lock points.

M-Lock Mode

Press and hold (REC) + (B) to switch to M-Lock mode. In M-Lock mode, user
cannot move past set lock points.

M-Zoom Mode

Press and hold (REC) + (C) to switch to M-Zoom mode. In M-Zoom
mode, user cannot move past set lock points. In M-Zoom, controller moves more
slowly between lock points for finer control.

Manual Mode

Specifically used with infinity lenses that have no start or end point. Press
(SET) + (B) for 3 seconds until you see the (A), (B), (C), (D) lights go on. Then use
(C) or (D) button to control the lens. (Hold down the C or D key for more
than 3 seconds to rotate continuously.) Once it rotates to the proper
position, click the (A) button to set a starting point, (B) button to set the end point.
After points are set, the (A), (B), (C), and (D) lights turn off to indicate the initialization
has been completed.
5