Cineroid LS1600i Panduan Pengguna
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan DJ Cineroid LS1600i. Cineroid LS1600i 2 halaman. Studio led light
Halaman CetakSTUDIO LED LIGHT
User's Guide
LS800i / LS1600i
Thank you for choosing the Cineroid LED light.
The Cineroid LED employs a very high color rendering index (CRI). It displays a very stable color temperature and brightness so that both motion
pictures and still images can be taken in their most natural color tones. Please read this user manual thoroughly before using the Cineroid LED.
It is recommended to test the Cineroid LED before use. Make sure the light comes on when powered and that the brightness control works properly.
Safety Precautions
Please observe the following safety precautions as they are meant for the safe and proper use of the product to reduce the risk of accidents. Upon
reading the user manual, keep it in a safe and available place.
Do not use any batteries, power cord, or accessories that are not speci ed in this document.
When using a power cord, be sure to plug it in completely. Do not handle power plugs when your hands are wet.
When unplugging the power cord, grasp the plug body or adapter instead of the cord.
Power cords that are scratched, heavily bent or twisted can potentially be hazardous and a source of electric shock and/or re.
Do not insert foreign objects into the product's electric or cable components.
Do not place the power cord near sources of heat as this may melt or cause damage to the cord potentially causing re or electric shock.
Do not disassemble or modify the product. This may damage the product and cause danger due to a malfunction.
Please keep the product out of reach of young children. Injuries may occur due to damage to the product.
When using the product in an airplane or hospital setting, it is recommended to acquire authorization rst as signals or electro-magnetic
waves from the product may cause other equipment to malfunction.
Do not store the product in a dusty or humid environment as damage may occur.
Do not clean the product with paint thinner, benzene, or other volatile solvents. It may cause damage to the product and become a re hazard.
This product is not waterproof. If the product is dropped in water, contact the service center immediately.
Package Contents
LS Main body
Power Cable
Barn Door
Di user
Yoke
Manaul
Speci cations
Model
LS800i
Dimensions
360 x150 x 32 mm
Weight
1610 g
Dimming Control
0~100 %
Color Temperature
2700ºK~6500ºK ±200ºK
Consumption
110 W
Light Angle
120 degree
Mount
1/4" screw mount
External Power
3400 Lux
DMX
512 Channel
LS1600i
653 x 150 x 32 mm
2950 g
0~100 %
2700ºK~6500ºK ±200ºK
230 W
120 degree
1/4" screw mount
8000 Lux
512 Channel