cinetics CineMoco Buku Petunjuk - Halaman 6

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Aksesori Kamera cinetics CineMoco. cinetics CineMoco 19 halaman.
Juga untuk cinetics CineMoco: Panduan Memulai Cepat (4 halaman)

Halaman Cetak
The interval between shots is the cycle length, or the time of camera exposure and motor movement
including delays. If your cycle length is set longer than the total time of the parts of the cycle, your
system will simply sit idle until the next cycle starts.
However, if the cycle length is shorter than the total time of the parts, your system will run all the parts
of the cycle until complete, then start again.
This means the interval between shots is the minimum cycle length, but not necessarily the maximum
cycle length.
4|

User interface and navigation

There are two types of screens in the cinemoco system: the main screen and menu screens. Every
screen in the software is divided into three sections.
| Status Bar
Displays non-selectable information
| Setting Names
Names of the different settings the user can
adjust
Documentation
| Setting Values
Values (either numbers or specific options) of
the setting
6
CineMoco
v1.0