ABB ACS355 series Panduan Tambahan - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Tambahan untuk Pengontrol ABB ACS355 series. ABB ACS355 series 16 halaman. Variable frequency drives in renewaire ventilators
Juga untuk ABB ACS355 series: Manual Suplemen (20 halaman), Panduan Instalasi dan Start-Up Cepat (2 halaman), Panduan Instalasi dan Start-Up Cepat (2 halaman), Petunjuk Instalasi (4 halaman), Panduan Instalasi dan Start-Up Cepat (4 halaman), Petunjuk Instalasi (4 halaman)

Halaman Cetak
ABB ACS355 series Panduan Tambahan
OPERATION
SETTINGS
USA
(800) 627-4499
FAX: (608) 221-2824
201 RAEMISCH ROAD
WAUNAKEE, WISCONSIN 53597 USA
WWW.RENEWAIRE.COM
CANADA
(905) 475-8989
FAX: (905) 475-5231
WWW.MITSUBISHIELECTRIC.CA
MEXICO,
CENTRAL & SOUTH AMERICA
52 (222) 2 233 911
FAX: 52 (222) 2 233 914
WWW.SOLER-PALAU.MX
16
16
ABB VDF
ABB VARIABLE FREQUENCY DRIVES
F9 EXAMPLE CALCULATIONS AND SETTING THE PARAMETERS
1. Set the VFD parameters for the minimum and maximum SPEEDS of the VFD:
• Set Parameter 1104 REF1 MIN to "20Hz". The motors will never run below this speed.
• Set Parameter 1105 REF1 MAX to "50Hz". The motors will never run above this speed.
2. Next calculate the ACTION LEVEL SIGNAL, the value of the analog signal from the controller
when CO2 = 600ppm:
Therefore:
3. The calculated ACTION LEVEL SIGNAL now needs to be expressed as a percentage of the SIGNAL RANGE,
but since the MINMUM SIGNAL VALUE = 4.0, calculate as follows:
4. Calculate the MAXIMUM RESPONSE LEVEL SIGNAL: the value of the analog signal from the controller
when CO2 = 1000ppm:
Therefore:
5. This calculated MAXIMUM RESPONSE LEVEL SIGNAL now needs to be expressed as a percentage
of the SIGNAL RANGE, but since the MINIMUM SIGNAL VALUE = 4.0, calculate as follows:
6. Set the parameters that will scale the response of the VFD to the inputs from the CO2 controller:
• Set Parameter 1301 MINIMUM AI 1 to "55%" (the MINIMUM SIGNAL VALUE).
• Set Parameter 1302 MAXIMUM AI 1 to "91%" (the MAXIMUM SIGNAL VALUE).
138291_009 (1/18)