ARC Audio XDi 402 Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Speaker Mobil ARC Audio XDi 402. ARC Audio XDi 402 4 halaman. Xdi series high performance component speakers

Halaman Cetak

CAUTION:

Please check the suitability of the installation loca-

tion before you begin. Do not cut any of the car's

structure. Pay attention to the mechanism of the

window and door.

If you do not have experience with automotive elec-

trical and mechanical systems contact a professional

installer. Paying a qualified installer is almost always

cheaper then paying a dealership to repair your car.

THE INSTALL

ARC Audio's XDi coaxial speakers are designed to fit

most vehicles without modification. Some locations will

require cutting to obtain a proper fit.

Remove the interior panel to expose the stock

speaker. It may take some time to find and

remove all the clip and screws to remove this

panel.

Remove the stock speaker and disconnect it from

the wiring.

Check the fit with the new speaker. Make sure

that all the door and window hardware will clear

the larger magnet.

You may have to trim some material from around

or behind to speaker.

Connect the stock speaker wires to the new

speaker. Tip: Use a 9V battery and quickly touch

it to the terminals of the stock speaker. If the cone

moves out the + of the battery is on the + of the

speaker. If you noted the color of wire connected

to this terminal then you now the + speaker wire.

Install the speaker in the location. You may have

to drill new holes to secure the speaker.

Reinstall the panel. Congratulations you finished

and ready to enjoy your new system.