CIOKS DC8 Panduan Pengguna
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Catu Daya CIOKS DC8. CIOKS DC8 2 halaman. Power supply for effect pedals
Halaman CetakPowering different pedal types
This issue is different for every individual rig, therefore please e-mail your specific questions
regarding powering your pedals using CIOKS power supplies directly to [email protected].
Technical specifications
AC input:
110-120VAC 60Hz or 220-240VAC 50Hz, max. 25W
Outputs:
Outlet 1-2: 9V DC / 100mA each, isolated
Outlet 3-4: 9 or 12V DC / 100mA each, isolated
Outlet 5-6: 9 and 12V DC / 300mA, outlets 5 and 6 share the same GND
Outlet 7-8: 9 and 12V DC / 300mA, outlets 7 and 8 share the same GND
Size:
146x88x35mm (excl. rubber feet)
Weight:
0,9kg
Warranty period: 5 years worldwide
What's in the box?
•
CIOKS DC8 power supply
•
mains power cord
•
11 Flex cables
•
pedalboard mounting HW (mounting bracket, screws, washers, stand-off and hex key)
•
manual
•
product sheet (drill guide)
•
Flex guide
CIOKS DC8
Power Supply for Effect Pedals
reversion 1.1 – March 2017
Introduction
Since 1991 the Danish company CIOKS has been providing guitar and bass players with
reliable power supplies dedicated for effect pedals. After our very first product CIOKS Baby
power supply was out in 1991, the Big John and Double Jack were launched in year 1995.
After a long break three more units were introduced in 2007 forming our Standard range of
dedicated power supplies for effect pedals. The big breakthrough came in year 2010 where
we've released the first products of the professional range with the DC10 as the most popular
product. CIOKS became global with distributors and dealers worldwide. The DC8 was
launched in 2011 along with AC8 as new members of our professional range just with a bit
smaller size and price tag compared to DC10 – ideal for smaller pedal boards.
Features
•
8 outlets configured in 6 isolated sections with a total current of 1.000mA
•
2 powerful DC sections with 300mA each, able to power 2 higher current pedals like
Strymon, Eventide or tc electronic
•
offers DC voltages 9 and 12V but also 18 and 24V with Stack Flex
•
high efficiency toroidal transformer
•
short circuit protection of all outlets
•
advanced LED monitoring of each section
•
compatible with Pedaltrain and Temple Audio pedalboards, mounting hardware incl.
Overview
Front
On the front of the enclosure you'll find 8 outlets of the power supply as RCA sockets which
all are centre positive. Correct polarity for the pedal is achieved by using the right Flex cable.
Top
On top of the enclosure you see the output voltage and max. current rating of each outlet
printed just above the outlet sockets. The top figure is the voltage and the DC in the middle
line tells you it's a direct current outlet. The bottom figure states the maximum current
capability of each outlet in mA. Outlets 3 and 4 with two possible voltage settings have both
values stated. Isolated sections with two outlets sharing the same GND have one common
figure for maximum total current which can be put out from both outlets in the section.
The status of each isolated output section is shown by a LED indicator also situated on top of
the enclosure just above the voltage figure. The function of this advanced and unique
monitoring feature is described in detail later on.
User's Manual