Cipax CPX Series Instalasi dan Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Instalasi dan Panduan Pengguna untuk Pemanas Air Cipax CPX Series. Cipax CPX Series 17 halaman. Closed tank 1350l

Halaman Cetak

General

The CPX 1350 L closed tank, Part No. 23013, is rotationally moulded in impact resistant and

durable polythene plastic to be used for:

-Drinking water.

-Rainwater.

-Wastewater.

-Other liquids. No flammable!

The tank is manufactured using an FC-approved material. (FC=Food Contact). Contact the

supplier for further information.

The tank is not intended for use as a septic tank.

RISE (Research Institutes of Sweden, former SP, Technical Research Institute of Sweden) has

performed strength testing, granting approval in accordance with EN-12566-1.

The tank is supplied as standard with a lockable cover, which is also produced from rotationally

molded polyethylene plastic. The cover has been tested and approved by SP in accordance with

the Swedish National Board of Housing's handbook for "Childproof wells" and SP method 0487

Trample Test version 3.

The tank can be installed above and below ground. When the tank is installed above ground the

tank will need additional support. See further instruction.

Warranty

The installation and user instructions must be followed.

If the tank and its other components are subjected to negligent treatment or if the installation

and user instructions are not followed, this may void the warranty.

Safety

The cover must be locked and unlocked using

the correct tools, e.g. a socket tool.

The cover must always be locked when placed on the tank.

Warning!

Never enter a wastewater tank that is in use.

The gases may lead to unconsciousness

and pose a life-threatening hazard.