Accurate Technology Digi Scale Model 20 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Ukur Accurate Technology Digi Scale Model 20. Accurate Technology Digi Scale Model 20 17 halaman.

Halaman Cetak

1. Determine appropriate mounting locations. Place the Encoder in a location that

will allow the scale to be inserted into the Encoder and attached to the moving part

of the target device.

2. Fasten the Encoder using three screws (or bolts) to the target device. If the

surface is excessively uneven, you may need to use washers or spacers to ensure

a good mount.

Positive

Readings

Negative

Readings

3. Note the orientation of the Encoder. When the side with two screw holes is on

the right, moving the scale up produces positive readings and moving the scale

down produces negative readings.

Accurate Technology Digi Scale

Scale

For

Scale

Down

For

Read-

head

Scale

Encoder

Scale:

Attached to moving part

Encoder:

Attach to stationary

Digital Readout

Scale

For

Negative

Readings

Scale

Down

For

Positive

Readings

Page 6 of 17