Accurate Technology ProScale 18W Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Timbangan Accurate Technology ProScale 18W. Accurate Technology ProScale 18W 20 halaman.

Stationary Scale installation

If your application is better suited for the scale to be held stationary and

the encoder moved along it during a measurement, you

should use the

move it along the scale (see illustration).

Attach the scale to a fixed point in your application

using the included screw. Place the encoder on the

scale. Attach the guide clip to a moving point in your

application such that the slot on the underside of the

clip engages the post on the top of the encoder and

captures it's movement along the scale. The guide clip

should exert some pressure on the encoder over the

full range of travel as the two move as a single unit.

Insure the scale and encoder are properly aligned as the encoder is

moved (the guide clip will compensate for slight misalignment in the

direction perpendicular to movement).

necessary. Plug the encoder cable into the readout.

E ncoder

Manual Part # 800-1405-001, Rev A

Guide Clip

Encoder stationary, Scale moving

M oving part

Scale stationary, Encoder moving

to capture the encoder and

Adjust the scale alignment if

Moving Part

Connector Link

Encoder

Scale

Guide Clip

G uide Clip

S cale

Page 8 of 20