AXT ELECTRONIC VSE Panduan Instruksi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Instruksi untuk Peralatan Pertanian AXT ELECTRONIC VSE. AXT ELECTRONIC VSE 10 halaman. Electronic doorkeeper

Halaman Cetak

e) Set a different opening time for opening on weekends (e.g. SA-SU 9 o'clock, LUX AND TIME)

activate the Menu (= hold Magnet for 3sec. at "OK/Menu")

With „down" 1time choose menu-item „Opening Mode"

Go into the menu-item with „OK".

Use up / down to select the "LUX AND TIME" mode if it is not set but is to be used.

Confirm the "LUX AND TIME" mode with OK if it has not already been set.

Change the opening time selection from Monday-Sunday (MO-SU) with 1x "down"

to Saturday - Sunday (SA-SU).

With 1x "OK" place the cursor on the HOUR hh:mm of the opening time.

Use up and down to set the desired new opening time. If no minutes are to be set,

confirm now with 2x "OK". Otherwise use 1x "OK", change the Minutes, and the 1x "OK" to save.

You return to the main menu. The setting has been changed.

When the changed settings are shown after exiting the menu, note and control the Saturday and Sunday

opening times.

Press down/up to select a new menu item for setting, or select and confirm the last menu item "EXIT", or wait 1 minute and do not operate

For Closing, set a twilight delay of 30 minutes (e.g. in "LUX ONLY" mode).

activate the Menu (= hold Magnet for 3sec. at "OK/Menu")

Select the menu item Closing Mode with 2x "down" and enter it with "OK".

Confirm the "LUX ONLY" mode with OK.

Confirm the set light threshold with "OK" or change as required with "up/down".

Use the "up/down" keys to set the desired minutes that the device should close after darkness

is detected. 1 to 90 minutes can be set.

Confirm with „OK".

Press down/up to select a new menu item for setting, or select and confirm the last menu item "EXIT", or wait 1 minute and do not operate

The cases given are application examples which are intended to explain and describe the function of the menu in general. Other menus

that are not displayed or explained are operated and set according to the same principle. There are also other options for setting and

adjusting times that are not explained in the above illustrations. General information can be found in the main operating instructions.

We are providing some Videos on our Website with the settings above. Use the QR-Code to get to them:

Reactions to light / dark or manual operation result in the menu operation being terminated and the

display being deactivated. If this happens, simply return to the menu. If possible, do not make settings

at times when the device would probably have to change its status during operation due to already

poor lighting conditions.

If the activation of the Menu (hold magnet on "OK/Menu" for 3 seconds) does not work immediately, remove the magnet for a few

seconds and try again.

AXT-electronic GmbH & Co.KG * Wartburgstraße 10 * 99817 Eisenach *

anything to have the menu guidance end automatically.

[email protected]

* www.axt-electronic.de