Arcam A38 Buku Pegangan - Halaman 6

Jelajahi secara online atau unduh pdf Buku Pegangan untuk Penguat Arcam A38. Arcam A38 18 halaman. Integrated and power amplifiers

Halaman Cetak

A38

connections

The A38 is equipped with two pairs of speaker

terminals. See page 8 for information on

Power inlet

Connect the correct

mains cable here.

��

Voltage select

Ensure the voltage selected

matches the local power supply.

This output provides a 12V signal whenever

the unit is switched on (i.e., not 'off ' or in

'stand-by'). This signal can be used to switch

on power amplifiers (or other equipment)

connected to the A38.

NOTE

Please read the 'Placing the unit' , 'Power' and

'Interconnect cables' sections on page 5 before

connecting up your A38 integrated amplifier!

Speaker terminals

connecting loudspeakers.

��

Remote in

This allows remote-control signals to

be received by the A38 if the remote

sensor is covered (or otherwise not

'visible' to the remote-control).

See page 7 for more information.

Trig out

Pre-/power-amplifier connections

These sockets are only used if you are using the A38

as a pre-amp, for example, when using the A38 in

conjunction with a P38 in a bi-amplified system.

See page 9 for more information.

�

��

�

��

Recording loops

The A38 is equipped with two

recording loops, for use with

recording devices (cassette

decks, CD recorders, etc.).

See pages 7 and 10 for more

information.

e-6

NOTE

The

and

trIG out

rEMotE In

in multi-room systems. They are not required for

normal use.

Phono input

A high quality phono input is available

as an optional extra to the A38.

See page 7 for more information.

�

��

�

��

audio inputs

These inputs are intended for use with your audio

equipment. The labels above the inputs give suggested

uses, but all 5 inputs have the same characteristics (all

are line-level inputs) and any suitable device may be

connected to any input. (Note, however, that the name

of the input shown on the front-panel display cannot

be changed.)

See page 7 for more information.

functions are only used

Phono earth terminal

For connecting your

turntable earth lead (if

required). Note that this

terminal must not be used as

a safety earth.