Arcam Delta 60 Buku Pegangan - Halaman 4

Jelajahi secara online atau unduh pdf Buku Pegangan untuk Penguat Arcam Delta 60. Arcam Delta 60 12 halaman. Arcam integrated amplifier handbook
Juga untuk Arcam Delta 60: Buku Pegangan (12 halaman), Panduan Servis (13 halaman)

Halaman Cetak

Delta 60 integrated amplifier handbook

MCI MM cartridge

Figure 1

selector switch

All audio inputs and tape outputs are via RCA phono

connectors. All the phono sockets on the Delta 60 are marked 'L' for left

and 'R' for right channels, with the left channels nearer the top of the

cabinet. Your connection ieads wiil be marked 'L' and 'R' or wili have a

white or biack piug for left and a red plug for right.

Disc input

For the purposes of playing records the Delta 60 can accept

both moving magnet and moving coil cartridges. For either type of

cartridge the plugs on your turntable lead should be connected to the disc

input sockets on the rear panei of the unit. A switch just to the side of these

sockets allows the selection of either MM or MC input. The switch should

be left out for use with moving magnet or high output moving

coil cartridges and depressed for use with normai (iow output) moving coil

cartridges.

If your turntable has a separate earth lead then this should be

attached firmly to the earth terminal on the rear of the amplifier.

Note

Never operate the mm/mc switch on the rear of the amplifier with

THE VOLUME CONTROL TURNED UP AS THE RESULTANT ELECTRICAL SURGE MAY DAMAGE

YOUR LOUDSPEAKERS.

Compact Disc input

This input is suitabie for use with any compact disc player (and

with our own Deita Black Box D/A converter coupled with a CD Player).

Connect your CD player to the amplifier using the phono sockets

marked CD.

Note

Aithough, like the tuner and tape inputs, the CD has a 'flat'

frequency response, its sensitivity is lower, to take account of the high

output signals generated by CD players. It is possible to use either a tuner

or another line source in the CD input but the ampiifier's voiume control

will have to be turned up to obtain a volume similar to that found when

using other inputs.