AXTON A480 Panduan Pemasangan & Pengoperasian - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pemasangan & Pengoperasian untuk Penguat AXTON A480. AXTON A480 20 halaman. Car audio system 1-/2-/4-channel power amplifiers
Halaman Cetak
Thank you for purchasing this AXTON amplifier!
To maximize the performance of this amplifier and your complete car audio system install, we
recommend that you acquaint yourself thoroughly with all technical features and controlling
options of this AXTON amplifier. Please read this manual carefully, before attempting the
installation.
If, after reading this manual, you still have questions regarding functions or the installation of
the amplifier, we recommend that you consult your dealer.
1. CONNECTIONS + CONTROLS A250
1.1 CONTROLS
1
RCA INPUTS 1/2-CH
Low-level stereo RCA signal input 1/2-CH for connection to head-unit.
2
INPUT GAIN CONTROL 1/2-CH
Input gain potentiometer for channel 1/2-CH, to match the output voltage of the head-
unit to the amplifier's input.
3
HIGH INPUT 1/2-CH
Molex connector terminal to insert the High level adapter (4-pin) that picks up the
amplified speaker signal from the head unit's front output (if head unit does not feature
dedicated RCA line outs).
4
OPERATION MODE SWITCH 1/2-CH
Slide switch to select the operation mode of the X-over for section 1/2-CH of the
amplifier.
5
X-OVER FREQUENCY CONTROL 1/2-CH
Control potentiometer to adjust the highpass or lowpass filtering frequency for section
1/2-CH of the amplifier.
1.2 INPUTS + OUTPUTS
6
POWER LED
LED to show "operating" status of the amplifier by green/red illumination. Green is
normal working state, red is protect state of amplifier.
7
"GND" POWER INPUT TERMINAL
Terminal to connect the amplifier to the chassis ground or negative pole of the car
battery.
8
"REM" INPUT TERMINAL
Terminal to connect the amplifier to the automatic (remote) turn-on / turn-off lead of the
head unit.
9
"+12 V" POWER INPUT TERMINAL
Terminal to connect the amplifier to the positive +12V pole of the car battery.
10 ATC FUSE HOLDER
Fuse holder for 1 x 20 A ATC fuse. Never deploy fuses of higher amperage rating.
– 2 –
1. CONNECTIONS + CONTROLS A250
11 SPEAKER OUTPUT TERMINAL
Output terminal to connect the speakers to the amplifier in either stereo or bridged
mode.
1
6 7
2
3
4 5
8 9
bl
bm
– 3 –