ABB Contrac PME120AI Petunjuk Manual - Halaman 5
Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Pengontrol ABB Contrac PME120AI. ABB Contrac PME120AI 20 halaman. Electrical part-turn actuator
Juga untuk ABB Contrac PME120AI: Petunjuk Manual (18 halaman)
1.2.2
ID Label for software description
1
Für / For
Antrieb / Actuator Typ / Type . . . . . . . .
2
Nennwerte / Rated values
M=....... .......°/s
3
F-Nr. / No.: . . . . . . . . . . . . . . . . . . . . . . .
4
NL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
SW Version . . . . . . . . . . . . . . . . . . . . . .
1 Associated actuator type
2 Rated values for torque / force / speed
3 Fabrication No.
4 No. of non-standard version
5 Actuator firmware release
2
Important information
2.1
General
Read and save all instructions prior to installing, operating, and servicing this product. If any of the
instructions are not understood, contact your ABB representative for clarification.
2.2
Symbols
In order that you can make the best use of this document and to ensure safety during commissioning,
operation and maintenance of the equipment, please note the following explanation of the symbols
used.
Explanation of the symbols used:
Symbol
STOP
As well as the instructions in this document, you must also follow the generally applicable accident
prevention and safety regulations.
If the information in this document is insufficient in any situation, please contact our service depart-
ment, who will be happy to help you.
Please read this document carefully before installation and commissioning
IMPORTANT To ensure proper performance, use qualified personnel who have been trained, qualified and certified
by ABB to install, operate, update, tune, and maintain the actuator, the electronic units and the wiring.
ABB will not take any responsibilty for personal injuries or material damages which were caused by
non-trained, non-qualified or non-certified personnel.
A68-2005-003 EN
Electrical Part Turn Actuators for Continuous Modulating Control PME120AI (Contrac)
Signal Word
Definitions
DANGER
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
(High level of risk.)
WARNING
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
(Medium level of risk.)
CAUTION
CAUTION indicates a potentially hazardous situation which, if not
avoided, could result in minor or moderate injury.
(Low level of risk.)
NOTICE
NOTICE indicates a potentially harmful situation which, if not avoid-
ed, may result in damage of the product itself or of adjacent objects.
(Damage to property)
IMPORTANT
IMPORTANT indicates useful hints or other special information
which, if not observed, could lead to a decline in operating conve-
nience or affect the functionality.
(Does not indicate a dangerous or harmful situation.)
Important information
5